Best spill control · Best value · Less waste

Oil Removal Cartridge Fitting Kits

Book A Site Demo

In this document you’ll find technical drawings of all the fitting kits available for Green Rhino Oil Removal Cartridges.

CodeDescription Application
GRR035100FITKType 1 Fitting Kit – ABS 1.5"–1.5" Male Threaded FittingTypically used on a concrete bunded area.
GRR035101FITK Type 1 Fitting Kit – ABS 1.5"–2" Threaded Bush Typically used on a concrete bunded area with a 1.5" fitting which requires a Type 2 cartridge (2" fitting) for flow rate or capacity.
GRR035102FITKType 1 Fitting Kit – ABS 1.5"–1.5" Male Thread Fitting XL Typically used on a bund where timber poles are used as an edge with a liner system, and the extended length of pipe passes through the wall.
GRR035150FITKType 1 Fitting Kit – S/S 1.5" - 1.5" Male Thread Hex Nipple Typically used on a steel earthed bunded area.
GRR035200FITK Type 2 Fitting Kit – ABS 2"–2" Male Thread FittingTypically used on a concrete bunded area.
GRR035201FITK Type 2 Fitting Kit – ABS 2"–2" Male Thread Fitting XLTypically used on a bund where timber poles are used as an edge with a liner system, and the extended length of pipe passes through the wall.
GRR035250FITK Type 2 Fitting Kit – S/S 2"–2" Male Thread Hex NippleTypically used on a steel earthed bunded area.

Type 1 Fitting Kit – ABS 1.5″–1.5″ Male Threaded Fitting

Type 1 Fitting Kit – ABS 1.5″–2″ Threaded Bush

Type 1 Fitting Kit – ABS 1.5″–1.5″ Male Thread Fitting XL

Type 1 Fitting Kit – S/S 1.5″–1.5″ Male Thread Hex Nipple

Type 2 Fitting Kit – ABS 2″–2″ Male Thread Fitting

Type 2 Fitting Kit – ABS 2″–2″ Male Thread Fitting XL

Type 2 Fitting Kit – S/S 2″–2″ Male Thread Hex Nipple

Book a Site Demo