EnviroPad

EnviroPad® Article: Spill Pad, Mat, Nappy or Tray – Which is Best? EnviroPad uses smart polymer technology to capture and solidify oil, fuels and other hydrocarbons. Unlike other spill products which act like a sponge and are prone to leak when saturated, EnviroPad can be stored or carried upright ...Read more



  • Summary
  • Case Studies
  • Specification
  • Description

EnviroPad®

Article: Spill Pad, Mat, Nappy or Tray – Which is Best?

EnviroPad uses smart polymer technology to capture and solidify oil, fuels and other hydrocarbons. Unlike other spill products which act like a sponge and are prone to leak when saturated, EnviroPad can be stored or carried upright, and even jet washed, without any contaminants escaping into the environment.

Our proprietary CG1 polymer has been specifically blended to attract a wide range of hydrocarbons including oil, diesel, petrol, hydraulic fluid and transformer liquid. The polymer reacts with spills and leaks converting them into solid rubber which cannot escape – even under pressure.

The high-quality mesh outer fabric wicks hydrocarbons across the surface to areas of unused polymer, to ensure you get the most out of every EnviroPad before it needs replacing.

Unlike other ‘spill containment’ products, contaminants will not flush out when EnviroPad is saturated or overflowing with rainwater. EnviroPad removes the risk of moving oil and water polluted trays, and significantly reduces the volume of waste you generate because contaminated water doesn’t pool inside.

Used EnviroPads can be disposed of in a standard hazardous waste container. The polymers are non-toxic, non-carcinogenic and have no special COSHH requirements.

EnviroPad Features in Balfour Beatty 2019 Sustainability Case Studies

EnviroPad Features in Balfour Beatty 2018 Sustainability Case Studies

Esh Construction: Using EnviroPad Boosts Environmental Credentials

Morgan Sindall Rates EnviroPad Best Practise for Spill Control

 

EnviroPad®

The spill pad that doesn't leak when it rains

  • Unique smart polymer spill pad
  • Solidifies oil and fuel so it can’t leak out
  • Removes the risk of overflowing during rainfall
  • Doesn’t need sidewalls or a liner
  • Can be safely used outdoors and jet washed 
  • 5 sizes: S, M, L, XL, XXL
  • Instructions printed on the top

Product Sheet Video Book A Site Demo
Considerate Constructors

Saves you money in 3 ways

  • EnviroPad® has the lowest cost per litre of oil absorbed (and is the only one that retains it permanently)
  • Reduces the volume of waste you produce because contaminated rainwater doesn't pool inside
  • With 5 sizes, you can save £££s across a project

Cost per litre of oil absorbed:

EnviroPad_Cost_Comparison_Table.png

 

CODE

PRODUCT

SIZE

CAPACITY

GRR 52 02 01 EPAD

EnviroPad S4 – Small

610 x 460 mm

Up to 4.5L oil

GRR 52 02 10 EPAD

EnviroPad M10 – Medium

900 x 690 mm

Up to 10.5L oil

GRR 52 02 20 EPAD

EnviroPad L20 – Large

1370 x 910 mm

Up to 20.2L oil

GRR 52 02 22 EPAD

EnviroPad XL30 – X Large

1370 x 1370 mm

Up to 30.4L oil

GRR 52 01 05 EPAD

EnviroPad XXL40 – XX Large

2180 x 1370 mm

Up to 44.3L oil

The spill pad that doesn't leak when it rains. Converts oil and fuel into solid rubber so it can’t leak out. Available in 5 sizes.

enviropad_splogo_smallbeforeafter_logos4_stihl_saws4_chainsaw_fuelm10_generatorl20_sawsl20_generator_saws_fuell30_lawnmower_fuell30_fuel_bowser_openl30_speedyl40_excavatorl40_jcbl40_jcb_closem10_l30_refuel_jcbs4_m10_hang_close

EnviroPad®

The spill pad that doesn't leak when it rains

  • Unique smart polymer spill pad
  • Solidifies oil and fuel so it can’t leak out
  • Removes the risk of overflowing during rainfall
  • Doesn’t need sidewalls or a liner
  • Can be safely used outdoors and jet washed 
  • 5 sizes: S, M, L, XL, XXL
  • Instructions printed on the top

Product Sheet Video Book A Site Demo
Considerate Constructors

Saves you money in 3 ways

  • EnviroPad® has the lowest cost per litre of oil absorbed (and is the only one that retains it permanently)
  • Reduces the volume of waste you produce because contaminated rainwater doesn't pool inside
  • With 5 sizes, you can save £££s across a project

Cost per litre of oil absorbed:

EnviroPad_Cost_Comparison_Table.png

 

CODE

PRODUCT

SIZE

CAPACITY

GRR 52 02 01 EPAD

EnviroPad S4 – Small

610 x 460 mm

Up to 4.5L oil

GRR 52 02 10 EPAD

EnviroPad M10 – Medium

900 x 690 mm

Up to 10.5L oil

GRR 52 02 20 EPAD

EnviroPad L20 – Large

1370 x 910 mm

Up to 20.2L oil

GRR 52 02 22 EPAD

EnviroPad XL30 – X Large

1370 x 1370 mm

Up to 30.4L oil

GRR 52 01 05 EPAD

EnviroPad XXL40 – XX Large

2180 x 1370 mm

Up to 44.3L oil

See also

Sediment Filter

Stay compliant and on schedule with this rugged and reusable dewatering filter

Sediment XL Filter

Our larger dewatering filter for higher volumes of sediment

Oil & Sediment Filter

The fast, effective way to dewater excavations contaminated with oil and/or sediment